Warning! These 7 Mistakes Will Destroy Your Drone

Warning! These 7 Mistakes Will Destroy Your Drone

Warning! These 7 Mistakes Will Destroy Your Drone


Here are the seven mistakes that will destroy your drone. 

  1. Flying in strong winds

Drones are usually fitted with batteries for power. If you fly your drone in strong winds, they consume more power to combat the strong winds and fly. Therefore, they need more energy to fight the strong wind currency, and this causes the battery to drain quickly.

Desist from flying in winds stronger than 35mph because your drone may incur some damages during takeoff. The drone may lose its balance and crash due to the strength of the wind.

It is not advisable to fly in strong winds because the drone may spiral out of control as its propellers slow down due to strong wind currents.

  1. Flying too far

If you fly your drone too far, it may drain its battery, and the drone may end up crash landing. According to the FAA guidelines, the highest altitude to fly your drone is 400 feet. Flying your drone too far may lead to loss of transmission. It may also lead you to fly your drone into obstacles and permanently destroy your beloved unmanned vehicle. 

  1. Flying in cold weather

Extreme cold weather lowers the chemical reactions in your drone’s Lithium polymer batteries. DJI recommends flying between 0°C to 40°C. On average, extreme cold drains your drone battery by up to 50%. 

Cold weather also causes mist and fog. These result in poor visibility on the drone’s camera, and it may cause a crash. Most importantly, the cold can interfere with the motherboard of your drone and cause irreversible damage. 

  1. Using unnatural moves

Flying a drone may give you a thrill, and you may end up trying some maneuvers that may lead to costly damage. Drones use rotors for propulsion and control. Hence, trying unnatural moves with your drone may end up being disastrous. Unnatural moves may lead to a crash into an obstacle or birds.

  1. Flying near metals and high buildings

Metals used in high buildings can interfere with your drone’s magnetic field. If you make a grave mistake of flying your precious drone near a metal, it may distort your drone’s GPS. 

That is because magnets tend to mess with GPS. Magnets may lead to your drone flying aimlessly and getting lost or crashing. 

  1. Trespassing

Trespass means gaining access to someone’s property or invading someone’s privacy without permission. The common mistake most drone owners make is flying over people’s property without permission. 

If you trespass, your drone can be confiscated and in some instances, your license revoked by the authority.

  1. Flying a drone inside a house

Another rookie mistake that can quickly destroy your drone within a blink of an eye is flying it inside the house. The drone can easily hit any place in the house when you fly it with the GPS on. That is because the GPS performance in an enclosed room is greatly diminished.  

If you must fly it inside the house, I’d recommend turning off the GPS. Flying a drone inside a house is a sure way to destroy your drone. 

Biggest drone mistakes you can easily avoid

  1. Not calibrating the gimbal

A gimbal aids the drone camera to retain its spot in any case of the motion in the drone. Adjust the gimbal correctly before the flight. Calibrate the gimbal in your controller settings.

  1. Launching a drone on a rugged surface

Avoid rugged surfaces when launching your drone. It will cause the drone to have turbulence during take-off. You can steer clear of this blunder by launching it from a flat surface area. It is advisable to take off and land from landing pads.

  1. Overconfidence in the sensor

Sensors in drones are primarily used for optical and thermal. Therefore, do not be over-confident with your sensors and look at them before the flight. You can achieve this by conducting a pre-flight test.

  1. Looking at the drone controller too long, you forget to look at the drone above.

This mistake is common among drone pilot beginners. If you focus too much on the controller, you may lose sight of the drone, and it may end up crashing on nearby obstacles. Avoid this by mastering the buttons on the controller.

  1. You are not performing a pre-flight test.

Pre-flight testing entails checking weather conditions, ensuring the drone is in good condition, software and hardware, and correct coordinates. Failure to conduct this test may lead to a disastrous outcome.  

Most drone pilots may assume the drone is good to fly due to the success of their previous flight. Always perform a pre-flight test before taking off.

If you have any drone issues, feel free to leave us a comment below.

Leave a Reply

Your email address will not be published.

Need quick help?